Mounting a 50ft Radio Tower to a Shipping Container
2 comments
See how Sophie mounted her 50ft radio tower to a container to improve internet and cell signal in a remote valley. Check our solutions for improving connectivity.
Tags: Antennas, Case Studies, Starlink, Unistrut
How I built a shipping container office on a budget
I share my process, mistakes and successes so you can learn from them before you build your container office. Including photos of the office transformation.
How to Frame a Shipping Container
6 comments
In this article we will show you methods for framing the outside of your shipping container - using timber, steel, Unistrut or scaffolding. Download the instructions here...
Tags: Banner, Cladding, Framing, How-to Guides
How to Mount a Starlink Kit to a Shipping Container
Learn how to securely mount your Starlink kit onto a shipping container, how high to install it & how to run the cable into the container. Full instructions & tips
Tags: Antennas, Container Homes, How-to Guides, Starlink
Building a branded shipping container structure
Utilising two 20’ shipping containers as a starting point, Renato needed to find a method to encase shipping containers in a steel framework to allow branding to be attached without damaging the rented containers.
Tags: Branding, Case Studies, Cladding, Container Conversions, Framing, Signage
Introducing our range of shipping container brackets
2 comments
All of our brackets are hot dip galvanised and come with the M12x25mm set screws and washers required for attaching to the Domino Clamp.Use them to attach structural timber around the upper edge of the container, support an overhanging shade canopy or awning, provide a solid mounting point above the shipping container or even bolt your container to the floor.
How to attach a banner to a shipping container
2 comments
Due to customer demand we are pleased to introduce a range of three kits for mounting a banner frame to your shipping container. Read the blog to find out how to attach a banner to your shipping container...
Adding CCTV cameras to a shipping container self storage site
2 comments
We spoke to Peter Scott, the Managing Director of Tidworth Self Storage about a recent project they completed to install CCTV to the site, using Domino Clamps.
Introducing our new Unistrut pipe clamps
1 comment
You may already know that we stock a range of Interclamp’s cast iron tube clamps which are available for 34, 42 and 48mm diameter tube (1”, 1 ¼” & 1 ½” pipe) but if you’re looking to attach tubes, pipes and cylindrical masts with a larger diameter than that, then our new Unistrut pipe clamps are perfect for the job.
Tags: Pipe and Tube, Unistrut
Attaching an awning to a shipping container tiny home
We spoke to Blake who used Domino Clamps to attach structural timber, creating the framework for an awning on a new shipping container Airbnb Solitary Shack.
Tags: Awning, Case Studies, Container Homes, Lumber, Timber, Wood
Introducing our new bolt and weld adapter plate
3 comments
If you’re looking to attach something to your shipping container and the holes don't line up with the M12 threads on the Domino, or there’s no bolting opportunities at all and it needs to be welded, then our new Bolt and weld adapter plate is for you!
Attaching gym equipment to a shipping container
We spoke to Will from Will To Train, who describes himself as a personal trainer, group fitness instructor and lover of all things fitness related, about his experience using Domino Clamps to attach gym equipment to a shipping container.