Vertical Tube Clamp
A single vertical tube clamp - Unbored, to support tube or bored, to allow the tube to pass through.
Available in three sizes: 34mm, 42mm, 48mm.
The clamp comes complete with two M12 x 30mm hex head set screws and two M12 washers. You will need (1x) Domino Clamp to complete this assembly and attach your tube.
Use these steel tube clamps to attach pipe or tube vertically to your shipping container.
This will be convenient as a fixing point for a wide range of other attachments. Floodlights, CCTV cameras, and wireless communication transmitters and receivers all benefit from elevated positioning with our vertical tube clamp set (bored and unbored).
Lightweight attachments such as smaller CCTV cameras, flags, signage and smaller LED lighting can be mounted with a single vertical tube clamp on the top corner casting.
Available in a range of sizes from 34mm to 48mm:
34mm | OD: 33.7mm, 1.315" | ID: 25.4mm, DN 25.4mm, 1" NPS , 1" NB
42mm | OD: 42.4mm, 1.66" | ID: 31.75mm, DN 31.75mm, 1.25" NPS , 1.25" NB
48mm | OD: 48.3mm, 1.9" | ID: 38.1mm, DN 38.1mm, 1.5" NPS , 1.5" NB
Key-Features
▶ Used to attach short tube vertically to a shipping container
▶ Secures steel scaffolding, galvanised or aluminium tubes, ERW welded tubes
▶ Compatible with pipes and tubes of nearly any material, including drain and water pipes
▶ Mechanical Support, no welding or drilling required
Technical Specifications - Vertical Tube Clamp
Compatibility: |
Compatible with standard M12 threads on Domino Clamps |
Corrosion resistance: | Screws & fittings: Zinc plate Domino Clamp: Zinc & Xylan |
Complete contents: |
(1x) Vertical tube clamp bored/unbored |